Amplificateur 4CH
D4-3500 Amplificateur audio de classe D de 3500 watts avec GaN
No. d'article: D4-3500
Model: D4-3500
Channel: 4 channel power amplifier
Feature: 1U/Digital Amp/2 Ohms Stable
Output Power:
8Ω Stereo Power (RMS): 3,500W X 4CH
4Ω Stereo Power (RMS): 6,000W X 4CH
2Ω Stereo Power (RMS): 6,600W X 4CH
Channel: 4 channel power amplifier
Feature: 1U/Digital Amp/2 Ohms Stable
Output Power:
8Ω Stereo Power (RMS): 3,500W X 4CH
4Ω Stereo Power (RMS): 6,000W X 4CH
2Ω Stereo Power (RMS): 6,600W X 4CH
Description
The D4-3500 is the largest 4-channel amplifier ever created, offering unparalleled power and performance in a compact design. It uses GaN transistors and Nippon Chemi-Con/Nichicon Japanese capacitors, high-quality components that guarantee exceptional sound quality and durability. The D-Series undergoes strict production processes and passes various quality testing procedures. This attention to detail results in a product that not only meets but exceeds industry standards.
D4-3500 DIGITAL AMPLIFIER FEATURE:
| ►4 x 6600W into 2ohms,4 x 6000W into 4ohms,4 x 3500W into 8ohms |
| ►Use Nippon Chemi-Con/Nichicon capacitors from Janpan |
| ►Gallium Nitride Transistors,Stable at 2 ohms long-term load |
| ►Active PFC,soft-switching for high adaptability |
| ►Wide voltage range of 90V-270V for harsh environments |
| ►Efficiency,energy conservation, environmental protection |
| ►Standby sleep mode，power-saving and durable |
| ►Damp Factor >5000 @20-200Hz,Powerful and profound low frequency |
| ►D4-3500 ideal for line array!For dual 18" subwoofer,it can only work stably at 4 ohms. |
| D-Series Digital Amplifier 4 channel | ||||||
| Model | D4-1300 | D4-1500 | D4-2000 | D4-3000 | D4-3500 | |
| EIAJ Test Standard,1 kHz, 1% THD | 8Ω/Stereo | 4 x 1300W | 4 x 1500W | 4 x 2000W | 4 x 3000W | 4 x 3500W |
| 4Ω/Stereo | 4 x 2300W | 4 x 2500W | 4 x 3400W | 4 x 5000W | 4 x 6000W | |
| 2Ω/Stereo | 4 x 2800W | 4 x 3000W | 4 x 4760W | 4 x 6500W | 4 x 6600W | |
| 8Ω/Bridge | 4 x 4800W | 4 x 5000W | 2 x 6800W | 2 x 10000W | 2 x 12000W | |
| 4Ω/Bridge | 4 x 6000W | 4 x 6000W | 2 x 9520W | 2 x 13000W | 2 x 12400W | |
| D-Series Digital Amplifier 2 channel | ||||||
| Model | D2-3000 | D2-3500 | D2-4200 | D2-4500 | ||
| EIAJ Test Standard,1 kHz, 1% THD | 8Ω/Stereo | 2 x 3000W | 2 x 3500W | 2 x 4200W | 2 x 4500W | |
| 4Ω/Stereo | 2 x 5000W | 2 x 6300W | 2 x 7800W | 2 x 8200W | ||
| 2Ω/Stereo | 2 x 7140W | 2 x 7400W | 2 x 8500W | 2 x 8600W | ||
| 8Ω/Bridge | 1 x 10200W | 1 x 12500W | 1 x 15600W | 1 x 16400W | ||
| 4Ω/Bridge | 1 x 14280W | 1 x 14800W | 1 x 17000W | 1 x 17200W | ||
| Power | PFC Power | |||||
| Rated power demand | 100-240V±10%, 50/60Hz | |||||
| Operation voltage | 90V-270V | |||||
| Power correction factor cos(φ) | >0.95 @ >500W | |||||
| Standby | 47W and 0.8A | |||||
| Gain,Sensitivity | 32dB,35dB,38dB,41dB | |||||
| Power Comsumption | 230V (115V in the BRIDGE MODE) | |||||
| Temperature | ||||||
| Environment temperature | 0°-45C / 32′-113*F | |||||
| Cooling system | Tunnel through cooing system | |||||
| Performance | ||||||
| Frequency Response | 20Hz - 20kHz (1W@8Ω,+05 dB) | |||||
| Signal-to-Noise Ratio | >110 dBA (20 Hz- 20 kHz A weighted) | |||||
| Crosstalk | >66 dB @ 1 kHz | |||||
| Input Impedance | 10 kΩ balanced | |||||
| Total Harmonic Distortion(THD) | <0.5% from 1 W to full power (Typitcal value<0.05%) | |||||
| Intermodulation Distortion(IMD) | <0.5% from 1 W to full power (Typical value< 0.05%) | |||||
| Damping Factor (8 ohms) | >5000 @ 20-200 Hz | |||||
| Slew Rate | 50V/μs @ 8Ω | |||||
| Front Panel | ||||||
| Indicator LED/per channel | One PCS Green LED: the input signal of XLR ≥ -40dB; Four pieces Green LED： display the output signal(-20dB,-10dB,-5dB,-3dB)of SPEAKON 1 piece dual LED(Yellow and Red): Protective state/Clip stste/Over heat/Over load |
|||||
| Power Switch | Press "I"-on; Press "O"-off. | |||||
| Dust-proof | Two pieces dust-proof cotton, it can take off to clean from the bottom of front pannel |
|||||
| Application | ||||||
| Signal in-connection | 4 Channel: One balanced XLR(with lock)female per channel; 2 Channel One balanced XLR(with lock)female and one balanced XLR male per channel. |
|||||
| Signal out-connection | One SPEAKON per channel connect to loudspeakers | |||||
| Power cord | Fited to the device, and the CSA(cross sectional area)of the cord is 3 x 2.5mm², and the card is 1.5 meters long. |
|||||
| Multiple-Functions Switch | Two Sensitivity Switches. One Mode Switch and one Clip Switch. | |||||
| Structure(The size and weight depend on different series and shipping demand ) | ||||||
| Dimensions | 482 x 44 x 380mm³/482 x 44 x 470 mm³ | |||||
| Net weight | 14kg-16kg | |||||
FRONT PANEL FEATURE
REAR PANEL FEATURE
Dimensions and Cooling system
|
NOTE:
The size is 437mm inside of the device(without the cover plate and front panel).The size is around 472mm of the complete device,but a little bit different size in the different front panel.Some series with different size that had not shown,please learn it in the parameter. Tunnel through cooling system Cold air comes in from the front panel of the equipment, forms a duct through the radiator to take the heat away and out from the rear panel of the equipment. |
 |
