Comment utiliser le logiciel DSP pour l'amplificateur de puissance numérique série D ?
FAQ

Comment utiliser le logiciel DSP pour l'amplificateur de puissance numérique série D ?

: 2896
: 2023-07-28 11:54:59

Note:
Our D series DSP amplifer used ALLDSP system from Gemany. It is suit for Windows,Mac and iOs system.
The application for iPad or iPhone can be downloaded and installed from the Apple Store.
App name: ALLControl, Remind you it is Paid-for Software.
For the Remote Operation Software (Windows and Mac) and Manual, Please check Download link:
htps://ww.sinbosen.co/oid1739142/Download.htm
 

Software operation
Step 1: Close the firewall on your computer. This is crucial to the software connection.

How to Turn Off and Disable the Windows 11 Firewall?

 

1. Select the Start  button > Settings  > Update & Security  > Windows Security and then Firewall & network protectionOpen Windows Security settings
2. Select a network profile: Domain networkPrivate network, or Public network.
3. Under Microsoft Defender Firewall, switch the setting to On. If your device is connected to a network, network policy settings might prevent you from completing these steps. For more info, contact your administrator.
4. To turn it off, switch the setting to Off. Turning off Microsoft Defender Firewall could make your device (and network, if you have one) more vulnerable to unauthorized access. If there's an app you need to use that's being blocked, you can allow it through the firewall, instead of turning the firewall off.
 
https://www.lifewire.com/how-to-disable-the-windows-firewall-2624505



 

Step 2: Install and open the software, connect with network cable.
If you see the Green arrow, that means the amplifier already connected with software.



 
Step 3: Click the Green arrow, you are enter to the first Control page. This is the Main page, you can control the Main Volume, Link function and MUTE here. But you cant do more operation on the page.


Step 4: Enter the password and operate more function.
After you enter the password, you can enter to second control page. Here you can control the Crossover (Xover) , limiter, delay, Gain function on input and output and so on.
 
Enter the password: Develo_p


Main page


Crossover


Input


Output

 
Note that for a Windows computer, there are separate applications for Windows 32 bit and 64 bit.
Attention: You cannot connect the unit to the network through the USB or Ethernet at the same time. You can only control the unit from one platform at the same time
- if you switch from one platform to another, you MUST shut down the control software at the previous platform first.
Local connectivity of the device to the control computer from a front-panel USB connector is also possible to download initial settings or as a fallback in case of network failure.
 

Contact us:
mailsales2@sinbosen.com
Whatsapp:https://api.whatsapp.com/send?l=en&phnoe=8616676738225
Website:https://www.sinbosenaudio.com/
Abonnez-vous à nous pour les mises à jour et les promotions de produits!